Lawnmower Derby

Date: Sat, Jul 26, 2025
Time: 6:00 pm - 9:00 pm

Admission: FREE

Participant Registration: Entry fee $25.00 per driver and pit crew.

General Info

The top 3 pay out $250.00, $150.00, and $100.00.

If you have any questions during your build, please contact us.

Derby Rules

• Hitting the sides is not allowed unless it is in the area directly in front of the cage.
• Front and rear hitting is preferred. At any time a driver touches the ground, they are done.
• If any mower lands on its side, all drivers MUST STOP!! We will set the mowers back up, and if the mower restarts, they can resume the derby.
• Numbers must be on the hood.
• Remember, this is for fun. We don't want anyone hurt.

Personal Protection

• A helmet, gloves, and a long-sleeved shirt are required.
• A fire suit is recommended but not required.
• Hall County officials have the final say on the day of the event.

Mower Rules

Chassis

• Front-engine riders only; no zero-turn mowers.
• All mower decks must be removed, no blades or rear equipment.
• Max 20 horsepower engine. Must have an engine tag on the engine.
• The clutch and brake pedals must work and will be inspected.
• Tires cannot be altered. No tractor tires or foam-filled.
• No tire chains.
• All plastic and lights must be removed. If the hood is plastic, it may remain.
• Can not be rope-started and must be able to start from the seat.

Safety Cage and Reinforcement

• All mowers must have leg guards.
• Guards should wrap around the back of the seat and extend forward to the pedals.
• Can not cover the engine area.
• Guards should be a minimum of 8" above fenders but no more than 16"
• Weld or bolt guard to fenders, frame, etc. The back of the cage or guard may be braced to the rear bumper.
• Adding expanded metal or sheet metal to the sides is recommended to protect the legs and feet.

Bumpers

• The front bumper is allowed. The rear bumper is permitted, but it must follow the rules.
• Front: Cannot exceed 12" past front of hood or frame. Cannot be higher than the top of the frame. Cannot exceed width of 18". Cannot exceed 15” high from ground up.
• Rear: Cannot exceed 16” out from mower frame. Can not exceed 12" above the ground. Can not extend past the outside of the tires.
• No sharp edges or spikes.
• Can be a maximum of 3" channel, tubing, square, or round.
• Suggest added bracing from the rear bumper up to the rear cage

Don't Do

• No grill guards.
• No foam-filled tires.
• Don't overbuild.
• No reinforcing of the engine area.
• No home-made mowers.
• No reinforcing of the frame.
• No tire guards.
• No front-mounted gas tanks or batteries.

Can Do

• The exhaust pipe can be straight, but it must point up or down, not sideways.
• The steering linkage can be reinforced.